16.12.24

5G Test Network Using srsRAN

As part of a master's degree thesis, a 5G test network based on the open source platform srsRAN for the base station (gNB consisting of a central unit and distributed unit) was put into operation. Open5GS is used as the 5G core network and an Ettus…

19.08.24

Digital Health Lab Day 2024

The ISC is co-organizing the Digital Health Lab Day 2024 and leading a workshop on wearable sensors for human gait and motion analysis.

07.08.24

IEEE International Conference on Electronics Circuits and Systems: Paper Accepted

“Efficient Depth and RGB Camera Fusion Algorithm for Depth Imaging with Improved Spatial Resolution” will be presented by Yannick Wälti at the ICECS 2024 conference to be held in Nancy, France from Nov 18 – 20, 2024.

19.07.24

ISC explores applications with event-based camera

The ISC explores new applications with an event-based camera, which detects differences in intensities and therefore allows new applications in computer-vision.

06.05.24

Successful first flight of the AVIRIS-4 spectrometer (a.k.a. CWIS-II) over Zurich

On Feburary 29, 2024, AVIRIS-4 has been tested in the air and spectral data of the city of Zurich has been successfully acquired.

04.03.24

ION ITM Conference-Paper on DGNSS published

"Investigating the accuracy of code based DGNSS as a function of correction data age, baseline length, and ionospheric activity" by Simon Moser, Luciano Sarperi, Michael Felux (2024 International Technical Meeting of The Institute of Navigation).

08.02.24

u-blox blog post about ZHAW bachelor's thesis

u-blox blog post about ZHAW bachelor's thesis by Manuel Haag and Matthias Ludwig.

04.12.23

IEEE SENSORS Conference Paper Published

“Improved Multi-Path Interference Separation for Indirect 3D Time-of-Flight using Particle Swarm Optimization” by Matthias Ludwig, Jonas Gutknecht, and Teddy Loeliger.

05.09.23

Congratulations on the MSE diploma to Hannes Stoll and Moritz Opplinger

The ISC congratulates Hannes Stoll and Moritz Oppliger on completing their Master of Science in Engineering (MSE) studies.

31.08.23

IEEE Sensors Conference Paper Accepted

“Improved Multi-Path Interference Separation for Indirect 3D Time-of-Flight Using Particle Swarm Optimization” will be presented by Matthias Ludwig at the 2023 IEEE SENSORS conference to be held in Vienna, Austria from Oct 29 – Nov 1, 2023.

15.08.23

GNSS modules with improved localization accuracy presented at ECC 2023 conference

A speech on low-cost multi-band and real-time kinematics (RTK) GNSS modules with improved localization accuracy was given by Luciano Sarperi at the ECC 2023 conference.

01.08.23

The ISC Welcomes Federico Wadehn as a new Lecturer

Dr. Federico Wadehn started on August 1st, 2023 at the ISC as a lecturer in signal and image processing.

12.12.22

ICAS 2022 Congress Paper Published

"Localization of Interrogators with a 1030/1090 MHz Spectrum Monitoring System" has been presented by Michael Jäger at the ICAS 2022 Congress held in Stockholm, Sweden, from September 4 - 9, 2022.

12.12.22

Paper published in the journal "IEEE Transactions on Signal Processing".

Marc Kuhn is co-author of an article titled “Pairwise node localization from changes in their UWB channels to observer nodes” in the journal IEEE Transactions on Signal Processing.

29.08.22

IEEE SENSORS Conference Paper Accepted

"Sensor Fusion of 3D Time-of-Flight and Thermal Infrared Camera for Presence Detection of Living Beings" will be presented by Moritz Oppliger at the 2022 IEEE SENSORS conference , to be held in Dallas, Texas USA from Oct 30 - Nov 2, 2022.

07.07.22

Technical Hand-Over of CWIS-II at NASA/JPL, California

The ISC develops the data acquisition and controling software for the new CWIS-II imaging spectrometer and is responsible for the complete system integration.

07.02.22

Commissioning of new antenna measurement hall / absorber chamber

The ISC has put a new antenna measurement hall into operation in order to expand its competencies in the field of antenna design. Frequency range: 500 MHz - 18 GHz (110 GHz), dimensions inside: L x W x H 3.7 x 1.9 x 1.8 m.

02.05.17

Industry 4.0 award for wireless data capture made by ZHAW

The ED-1 measuring tool was developed by Derichs GmbH in collaboration with the ZHAW School of Engineering. It records important data from cooling and heating rollers in the plastics industry. The ED-1 has now received the ICE Europe Award in the…